12×1.5mm Outrunner Adapter Shaft

Tru-Turn Out-Runner Adapters are CNC Machined to Extremely Precision Tolerances to prevent Runout and Vibration.

These Out-Runner Adapters are the same Shaft Size, but Longer than the factory adapters to allow for Tru-Turn Spinner Applications.

These Precision Adapters are already tapped for the Tru-Turn cone screw to avoid additional hardware and ensure a "Precision Lightweight Setup".

The Tru-Turn Outrunner Adapter shafts are a "Precision Fit" to the 3 & 4 bolt Outrunner motors such as AXI, E-flite, Hacker and "Many Others".

This Precision Outrunner Shaft will use your Factory Mounting Screws, Prop Nut & Prop Washer.

THIS ADAPTER REQUIRES YOUR BACKPLATE TO BE REAMED TO 12mm.

1.24 oz / 35.15 Grams

12x1.5mm Outrunner Adapter ShaftThis adapter is compatible with Any 'E' Prop that is "Designed" to run on a 12mm Shaft Motor.

This Precision Shaft Adapter is designed Specifically for the E-Flite110 or 160 as well as AXI5300 motors that come with the 12mm Out-runner using the 4 Bolt Attachment. This adapter uses a 'Precision' Dia. Pilot Bore, and will work well on most motors of this type.