12×1.5mm Outrunner Adapter Shaft
Tru-Turn Out-Runner Adapters are CNC Machined to Extremely Precision Tolerances to prevent Runout and Vibration.
These Out-Runner Adapters are the same Shaft Size, but Longer than the factory adapters to allow for Tru-Turn Spinner Applications.
These Precision Adapters are already tapped for the Tru-Turn cone screw to avoid additional hardware and ensure a "Precision Lightweight Setup".
The Tru-Turn Outrunner Adapter shafts are a Precision Fit to the 3 & 4 bolt Outrunner motors such as AXI, E-flite, Hacker and Many Others.
This Precision Outrunner Shaft will use your Factory Mounting Screws, Prop Nut & Prop Washer.
This is a 12mm outrunner shaft, Requiring the Backing Plate to be reamed to match.
**see TTE-08472-AC for newer Turnigy G-160 motors**
THIS ADAPTER REQUIRES YOUR BACKPLATE TO BE REAMED TO 12mm.
1.01 oz / 28.63 Grams
12x1.5mm Outrunner Adapter ShaftThis adapter is compatible with Any 'E' Prop that is "Designed" to run on a 12mm Shaft Motor.
This Precision Shaft Adapter is designed for AXI, E-Flite, Hacker, and other motors that come with the 10mm Outrunner using the 3 & 4 Bolt Attachment. This adapter uses a 'Precision' Dia. Pilot Bore, and will work well on most motors of this type.