10×1.5mm Outrunner Adapter Shaft
Tru-Turn Out-Runner Adapters are CNC Machined to Extremely Precision Tolerances to prevent Runout and Vibration.
These Out-Runner Adapters are the same Shaft Size, but Longer than the factory adapters to allow for Tru-Turn Spinner Applications.
These Precision Adapters are already tapped for the Tru-Turn cone screw to avoid additional hardware and ensure a "Precision Lightweight Setup".
The Tru-Turn Outrunner Adapter shafts are a "Precision Fit" to the 3 & 4 bolt Outrunner motors such as AXI, E-flite, Hacker and "Many Others".
This Precision Outrunner Shaft will use your Factory Mounting Screws, Prop Nut & Prop Washer.
This Adapter is Extremely Lightweight and converts your TRU-TURN Spinner to a matching, lightweight E-Cone Screw. There are two (2) screws per kit to allow you to select the proper length, for proper fit.
THIS ADAPTER REQUIRES YOUR BACKPLATE TO BE REAMED TO 10mm.
.79 oz / 22.40 Grams
10x1.5mm Outrunner Adapter ShaftThis Adapter is compatible with Any 'E' Prop that is "Designed" to run on a 10mm Shaft Motor.
This Precision Shaft Adapter is designed for AXI, E-Flite, Hacker, and other motors that come with the 10mm Outrunner using the 3 & 4 Bolt Attachment. This adapter uses a 'Precision' Dia. Pilot Bore, and will work well on most motors of this type.